Re: Keyword 0808

Sorry but you are not reight. That command sequence corresponse to
ISO 14230 (also known as KWP2000 for VW) and not to ISO 9141 (also
known as KWP1281 or 1271 for VW).
Bye

--- In opendiag@yahoogroups.com, "Bülent Özen" <ozenelekt@i...>
wrote:
> hi Andreas
>
> i have explained how an ISO9141-2 will be initialized in a recent
message in
> opendiag archive. i uploaded a file ISO9141 in file section of
opendiag for
> introduction and signal level.
> after an succefully init you send ( 10400 baud ) to ECU
>
> 0x68 0x6A 0xF1 0x03 CS to read the DTC
>
> response 0x48 0x6B ECUAdd 0x43
DTC1highbyte
> DTC1lowbyte .................. CS
>
> 0x68 0x6A 0xF1 0x04 CS to clear DTCs
>
> response 0x48 0x6B ECUadd 0x44 CS
>
>
> regards
>
> Bülent
>
>
>
>
> ----- Original Message -----
> From: "Andreas Siemering" <student@a...>
> To: <opendiag@yahoogroups.com>
> Sent: Saturday, July 12, 2003 8:13 PM
> Subject: RE: [opendiag] Keyword 0808
>
>
> > Hi Bülent,
> >
> > thanks for your help. Is there any documentation about
> > ISO9141-2 communication available on the web? Because
> > I have no idea how to establish communication since
> > none of the programms worked. Maybe with some papers
> > I can start develop my own application. At the moment
> > I am only interested in reading and deleting fault codes.
> >
> > Regards
> > Andreas
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > opendiag-unsubscribe@egroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >

 
Received on Sun Jul 13 09:59:37 2003