RE: [opendiag] Re: please help me

Hello
 
With Harrison Software it is not possible to communicate using physical
addressing of ECU. İt use only 0x33 ( PID00-1F using J1979 ) For
Renault you must build a little ISO9141 interface and try to connect to
siemens sirius32 directly.
 
A little exemple
 
You send <0x82><0x7a><0xF1><0x21><0xa0><CS>
 
You get <0x86><0xF1><0x7A><0x61><0xa0><datas><CS>
 
 
The Byte 0xa0 to 0xff let respond the sirius32.
 
There are some response to 0x33 too . But incomplete.
 
Best regards
 
Bülent
 
 
 
 
 
 
 
 
-----Original Message-----
From: fabiogibbo [mailto:fabiogibbo@...]
Sent: Sunday, August 24, 2003 7:43 PM
To: opendiag@yahoogroups.com
Subject: [opendiag] Re: please help me
 
oh yes i really know !
But think you there is a method to talk with it?
and wath does it mean sen 0x33 or 0x7a shoul someone post a example
in programming?
tanks

> Hi
>
> Renault clio 2000 is not intented to meet any OBD requirement but
clio
> 2002 is fully EOBD compliant
>
>
> B/R
>
> Bülent
>
>
> -----Original Message-----
> From: fabiogibbo [mailto:fabiogibbo@y...]
> Sent: Sunday, August 24, 2003 6:13 AM
> To: opendiag@yahoogroups.com
> Subject: [opendiag] please help me
>
> Hi,
> i've bought harrison obd universal (ISO 9141-2 ,KWP-2000 and
other)
> interface (Microchip inside) , and i've tried to connect it on the
> obd connector present on my REnault Clio RS 2000 cc 172 HP year
> 2000 and didn't talk :(
> The Ecu is Siemens SIRIUS 32.
>
> I've tried the interface on another Car like mine and same problem.
>
> Then i've tried it on REnault Clio RS 2000 cc 172 HP year 2002
and
> it talk very well :)).
>
> So my protocol is different Although all this car have obd 16 pin
> connector?.
>
> So i 've made the optoisolator type interface (jeff interface),
and
> tried with vag-com and if i send code 01 i get:
> Obd-II
> Protocol unknown
> GD83 is not know protocol
> Or Similiar.
>
> i've read a lot of message about sirius32 but i don't know how
send
> that parameter.
> Wich program could help me for send parameter?
> I also tried linux tool freescan but didn't talk :((
>
> I need some info for start !!!
>
> Please let me know
>
> By
>
> Fabio
>
>
>
>
>
>
> Yahoo! Groups Sponsor
>
>
> ADVERTISEMENT
>
>
<http://rd.yahoo.com/M=259538.3760361.5018013.1261774/D=egroupweb/S=1
705
> 004726:HM/A=1712983/R=0/SIG=11u38u3s2/*http:/hits.411web.com/cgi-
bin/hit
> ?page=1374-105951838331032> click here
>
>
> <http://us.adserver.yahoo.com/l?
M=259538.3760361.5018013.1261774/D=egrou
> pmail/S=:HM/A=1712983/rand=685076407>
>
> To unsubscribe from this group, send an email to:
> opendiag-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo!
> <http://docs.yahoo.com/info/terms/> Terms of Service.
>
>
> [Non-text portions of this message have been removed]

Yahoo! Groups Sponsor

ADVERTISEMENT
 
<http://rd.yahoo.com/M=259538.3760361.5018013.1261774/D=egroupweb/S=1705
004726:HM/A=1712983/R=0/SIG=11u38u3s2/*http:/hits.411web.com/cgi-bin/hit
?page=1374-105951838331032> click here

 
<http://us.adserver.yahoo.com/l?M=259538.3760361.5018013.1261774/D=egrou
pmail/S=:HM/A=1712983/rand=965254027>

To unsubscribe from this group, send an email to:
opendiag-unsubscribe@egroups.com

Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/> Terms of Service.

[Non-text portions of this message have been removed]

 
Received on Sun Aug 24 10:22:01 2003