Re: Help me please !!!!!!!!!!! ISO9141 and KWP2000 !!!!!!!

Hi !

Humm, I don't think so !! Since 1996 european vehicule have OBD !!
And I even had problems with my subaru and the garage put a
diagnostic tool to tell me what was wrong... So... Help me finding
another thing ;)

Perhaps someone will tell me blablabla and I will say.. Of course,
that's it !!

But now I don't understand at all, because my signal, trust me, is
ok....

Help me !

Bye and thanks for all !

--- In opendiag@yahoogroups.com, "Niels Ezerman" <nez@n...> wrote:
> Hello
>
> ----- Original Message -----
> From: "nakapuff2001" <leonard.frechet@c...>
> To: <opendiag@yahoogroups.com>
> Sent: Monday, January 12, 2004 1:04 PM
> Subject: [opendiag] Help me please !!!!!!!!!!! ISO9141 and
KWP2000 !!!!!!!
>
>
> Hi everyone !
>
> I made an interface which is 'hardware correct'. I made also a
small
> software for PIC16F876 which can communicate with a PC at 9600Bds
and
> which is able to deal with ISO and KWP2000 at 10400Bds.
>
> Ok, I've got a serious problem ! The vehicules I have (A year 2000
> Peugeot 206 diesel and a Year 2000 Subaru GT turbo)
> I guess that the peugeot was KWP and the subaru was ISO9141.
> Anyway, I tried to generate the Slow Init Sequence and then the
fast
> init sequence....
>
>
> I guess it is European cars,
> if so I do not think the Peugeot support EOBD (0x33).
> It must first support EOBD from Jan. 2004
> Also the Subaru could be the same, it must have EOBD from Jan.2001.
> I would say find some newer cars to test.
>
>
> Bye Niels

 
Received on Mon Jan 12 12:33:15 2004