Hi,
how about using the gnu tools ?
A port for C166 can be found here:
ftp://www.hightec-rt.com/gnu-c16x/
Regards, Rainer
PS: Which OS do you use for development ? Linux, DOS, WIN ?
gdump should do it, gdb also ->
C:\Program Files\gnu 166\BIN>gdump166
Usage: C:\PROGRA~1\GNU166~1\BIN\GDUMP166.EXE [-ahifdDprRtTxsSlw] [-b bfdname] [-
m machine] [-j section-name]
[--archive-headers] [--target=bfdname] [--disassemble]
[--disassemble-all] [--file-headers] [--section-headers] [--headers]
[--info] [--section=section-name] [--line-numbers] [--source]
[--architecture=machine] [--reloc] [--full-contents] [--stabs]
[--syms] [--all-headers] [--dynamic-syms] [--dynamic-reloc]
[--wide] [--version] [--help] [--private-headers]
[--start-address=addr] [--stop-address=addr] objfile...
at least one option besides -l (--line-numbers) must be given
C:\PROGRA~1\GNU166~1\BIN\GDUMP166.EXE: supported targets: c16x srec symbolsrec t
ekhex binary
opendiag@yahoogroups.com schrieb am 01.04.01:
> Here is a link to the instruction set manual of the c166
> http://www.infineon.com/cmc_upload/0/000/008/056/c166_ism_v2.0_2001_03.pdf
>
>
>
> I think I will start to programm that disassembler... Because the
> disassembler from infineon just sucks... writing the disassembled file into
> a txt is not possible...
>
> Does anybody want to write the disassembler with me?
>
> regards,
>
> BEN
>
>
>
> To unsubscribe from this group, send an email to:
> opendiag-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
_______________________________________________________________________________
Alles unter einem Dach: Informationen, Fun, E-Mails. Bei WEB.DE: http://web.de
Die große Welt der Kommunikation: E-Mail, Fax, SMS, WAP: http://freemail.web.de
Received on Mon Apr 02 03:38:45 2001
This archive was generated by hypermail 2.1.8 : Wed Jan 02 2008 - 00:56:02 CET