Hello,
the ELM is only for kwp2000 specification part 4
(can be found in the files area)
This is only related to the exhaust of the engine, for the US market.
To get acces to the other ECU's you need to send a different length of data
ELM will NOT support this.
You have to find an other option.
Goodluck
Mirica Alexandru <alexmirica@...> wrote:
No, because the AT SH modifies only the headers, the base address remains the same.
It's IMPOSSIBLE to comm with Airbag with ELM!!!
admurateur wrote:
Mirica Alexandru a écrit :
> Nooo, there are another causes:
> - The airbag comm are at 4800 baud, not 10400 baud
is it possible to change comm speed of the elm323 ??
> - the protocol used is ISO9141, not KW2000
elm 323 is both ISO9141 and ISO14230(kwp2000), no ?
> The init is same, 5baud fast init but at addr 0x00, not 0x10 (ECU addr)
possible to change address with AT.SH command, I think...?
Yahoo! Groups SponsorADVERTISEMENT
---------------------------------
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/opendiag/
To unsubscribe from this group, send an email to:
opendiag-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
---------------------------------
Do you Yahoo!?
Yahoo! Small Business - Try our new resources site!
[Non-text portions of this message have been removed]
Yahoo! Groups Links
---------------------------------
Do you Yahoo!?
Yahoo! Small Business - Try our new resources site!
[Non-text portions of this message have been removed]
Received on Tue Apr 26 11:14:25 2005
This archive was generated by hypermail 2.1.8 : Wed Jan 02 2008 - 00:56:04 CET