Success at last with jeff's circuit

I would like to thank all of you who responded to my previous emails
regarding trouble shooting with Jeff's circuit. I got it working yesterday
with help from my colleagues "Paul Phillips & Phil McGonnell".

I had made a mistake on the board i.e. swapped the rs232 connector type -
used female instead of male etc.

Thanks everyone !

Chas.

PS For reference I have used the Infineon SFH615-A2 optoisolator

***************************************************************************
THIS E-MAIL AND ANY ATTACHED FILES ARE CONFIDENTIAL, PROTECTED BY COPYRIGHT
AND MAY BE LEGALLY PRIVILEGED. If you are not the intended addressee or
have received the e-mail in error, any use of this e-mail or any copying,
distribution or other dissemination of it is strictly prohibited. If you
have received this transmission in error, please notify the sender
immediately and then delete the e-mail. E-mail cannot be guaranteed to be
secure, error free or free from viruses. Neither the sending company nor
its group of companies accepts any liability whatsoever for any loss or
damage which may be caused as a result of the transmission of this message
by e-mail. If verification is required, please request a hard copy version.
***************************************************************************

 
Received on Wed Aug 01 01:21:19 2001