Re: [opendiag] Re: Idle adaptation values reset

VAG com haven't a kwp2000 command line.
It is not resetting with battery disconnected.
Every dealer can reset this with TECH2. The command is "reset ECU" .
If you got a simple k-line interface then write a little DOS based program.
Fast init 10400bps, 8N1, wake-up 25ms low level, 25ms high level and
StartCom 81 11 F1 81 <cs> with 5ms inter-byte time for all commands.
perhaps some tester present every 1000ms after ECU answer
TesterPresent 80 11 F1 01 3E <cs>
then your reset
ResetAllLearnedValues 80 11 F1 02 11 01 <cs>
If you get 7Fh response it isn't OK.

radix

cichmen schrieb:

>Thanks for answer!
>Do you know how to do it (without programming my own soft or buying
>Tech2)? I haven't checked it yet - maybe you know - works Vag Com with
>this engine?
>
>Maybe - is it possible, that learned values are reseted if battery is
>disconnected?
>
>Thanks,
>Cichmen
>
>
>--- In opendiag@yahoogroups.com, radix <juglandis@g...> wrote:
>
>
>>Hi,
>>
>>Unfortunately you can't do it with Sanders program.
>>
>>ResetAllLearnedValues 80 11 F1 02 11 01 <cs>
>>
>>radix
>>
>>cichmen schrieb:
>>
>>
>>
>>>Hi all,
>>>
>>>my question is - is there possibility how to reset idle adaptation
>>>values on X10XE engine (ECU is M1.5.5)?
>>>Is it possible with Sanders prog?
>>>
>>>Thanks!
>>>
>>>Cichmen
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>Yahoo! Groups Links
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>
>
>
>
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>

 
Received on Wed Dec 21 10:46:58 2005