Re: Idle adaptation values reset

From: cichmen <cichmen@...>
Date: Wed Feb 08 2006 - 07:10:47 CET

Radix,
I'm back with this issue. I'm not sure if your idea with
command "reset ECU" is right. For me it seems it is like SW reset of
unit but adaptation values remain in memory.
My experience - I changed on my car (x10xe) iddle stepper motor and
cleaned throttle valve. Now idle speed remains for about 2s higher
and then goes down to the normal value (this appears for exemple
between gear change). I think it is caused by adaptation values from
past. I tried "reset ECU command" from Sanders prog, but I didn't see
difference.

Thnx,
Cichmen

--- In opendiag@yahoogroups.com, radix <juglandis@...> wrote:
>
> VAG com haven't a kwp2000 command line.
> It is not resetting with battery disconnected.
> Every dealer can reset this with TECH2. The command is "reset ECU" .
> If you got a simple k-line interface then write a little DOS based
program.
> Fast init 10400bps, 8N1, wake-up 25ms low level, 25ms high level and
> StartCom 81 11 F1 81 <cs> with 5ms inter-byte time for all commands.
> perhaps some tester present every 1000ms after ECU answer
> TesterPresent 80 11 F1 01 3E <cs>
> then your reset
> ResetAllLearnedValues 80 11 F1 02 11 01 <cs>
> If you get 7Fh response it isn't OK.
>
> radix
>
> cichmen schrieb:
>
> >Thanks for answer!
> >Do you know how to do it (without programming my own soft or buying
> >Tech2)? I haven't checked it yet - maybe you know - works Vag Com
with
> >this engine?
> >
> >Maybe - is it possible, that learned values are reseted if battery
is
> >disconnected?
> >
> >Thanks,
> >Cichmen
> >
> >
> >--- In opendiag@yahoogroups.com, radix <juglandis@g...> wrote:
> >
> >
> >>Hi,
> >>
> >>Unfortunately you can't do it with Sanders program.
> >>
> >>ResetAllLearnedValues 80 11 F1 02 11 01 <cs>
> >>
> >>radix
> >>
> >>cichmen schrieb:
> >>
> >>
> >>
> >>>Hi all,
> >>>
> >>>my question is - is there possibility how to reset idle
adaptation
> >>>values on X10XE engine (ECU is M1.5.5)?
> >>>Is it possible with Sanders prog?
> >>>
> >>>Thanks!
> >>>
> >>>Cichmen
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>Yahoo! Groups Links
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >
> >
> >
> >
> >
> >
> >
> >
> >Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
> >
>

 
Received on Tue Feb 07 22:11:33 2006

This archive was generated by hypermail 2.1.8 : Wed Jan 02 2008 - 00:56:05 CET