Thanks!
--- In opendiag@yahoogroups.com, radix <juglandis@...> wrote:
>
> Yes, the part of ISO 14230 (KWP2000) describes the physical
layer ,based
> on ISO 9141, on which the diagnostic services will be implemented.
It is
> based on the physical layer described in ISO 9141-2, but expanded
to
> allow for vehicles with either 12 or 24 voltage supply.
>
> thomson336 schrieb:
>
> >thanks.
> >include ISO9141?
> >
> >--- In opendiag@yahoogroups.com, radix <juglandis@> wrote:
> >
> >
> >>Yes. KWP 71/81/1281/82/2000, DS2 BMW
> >>Pull-up resistor 510 ohms 12 volts, 1000 ohms 24 volts cars.
> >>High speed transfer >10400 bps pull-up 1000 ohms is better.
> >>
> >>radix
> >>
> >>thomson336 schrieb:
> >>
> >>
> >>
> >>>thx
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>Yahoo! Groups Links
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >
> >
> >
> >
> >
> >
> >
> >
> >Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
Received on Thu Mar 23 08:24:25 2006
This archive was generated by hypermail 2.1.8 : Wed Jan 02 2008 - 00:56:06 CET