Re: Peugeot ECU pinout (IAW 6LPA.02)

Hello Stelios,

Thank you for your email. After much searching, I've managed to find
the correct pinout for the Magneti Marelli 6LP ECUs:

In case anyone needs them, the pins on the 6LP ECU are:

Ground: right connector - G4 and H4
12V: right connector - C3
Ignition 12V: middle connector - G4, left connector - H4
K-line: right connector - B4

If it helps, the colours on these connectors are as follows: right
(black), middle (brown), left (grey)

Cheers,

Dean

--- In opendiag@yahoogroups.com, "Stelios Alexandrakis" <reystos@...>
wrote:
>
> Hi Dean,
>
> I know that the three connector layout is very common in the whole
> Citroen/Peugeot second generation (after 2001) ECUs.
> The ECU from Marelli you are referring to is MM48P and I have found
> that they share in common a lot of their protocols.
> So far I have only been able to read ECU code and version numbers,
but
> that is as far as I go. Let me suppose that you need the pinout in
> order to program the ECU on desk...
>
> I will let you know as soon as I find out more!
> Stelios
>
>
> --- In opendiag@yahoogroups.com, "aa_dean" <aa_dean@> wrote:
> >
> > Hi all,
> >
> > Would anyone happen to have an ECU pinout for the Peugeot Marelli
IAW
> > 6LPA.02 engine ECU? This is from a 307.
> >
> > The ECU has three connectors.
> >
> > I have a pinout for a similar Marelli unit from the 406, but it
doesn't
> > match up exactly.
> >
> > Many thanks in advance,
> >
> > Dean
> >
>

 
Received on Tue Aug 15 10:29:20 2006