Re: SAE J2534 Documment

I'm trying to use the Nissan J2534 reprogramming software available
here: http://www.nissan-techinfo.com/Nissan/consult2/Nissan-CONSULT-
II-J2534.exe. It shuts itself down after the first call to
PassThruConnect.

The Mitsubishi update manager available here:
http://www.mitsubishitechinfo.com/epacarb/applications/Update_Manager
_A_setup.exe does the same thing but it reports a protocol error
first.

These applications use the older j2534 protocol version which
doesn't require deviceID as a parameter for PassThruConnect call.
I've tried both versions anyway.

I've tried different values for the ChannelID but nothing seems to
work.

Thanks for your help

 
--- In opendiag@yahoogroups.com, "blue tooth1" <yetiman@...> wrote:
>
> "The value pointed to by pChannelID is used as the logical
identifier for
> the combination of device ID and protocol ID."
>
> unsigned long * pChannelID;
>
>
>
> Maybe the DLL ACTUALLY uses the device ID and protocol ID to
create the
> value pointed to by pChannelID. Then the caller verifies the
return by
> checking the value pointed to by pChannelID?
>
> If you want to send me sample code I can try to verify for you.
Which
> application are you looking at to make the API calls?
>
>
> -----Original Message-----
> From: opendiag@yahoogroups.com [mailto:opendiag@yahoogroups.com]
On Behalf
> Of tbkolo
> Sent: 12 January 2007 16:23
> To: opendiag@yahoogroups.com
> Subject: [opendiag] Re: SAE J2534 Documment
>
>
>
> Yeah I'm doing that but the OEM software reports a protocol error
> and closes.
> What are the valid channel IDs? Is there a range?
>
> Thanks,
> Tom
>
> --- In opendiag@yahoogroup <mailto:opendiag%40yahoogroups.com>
s.com, "blue
> tooth1" <yetiman@> wrote:
> >
> > It should return a valid channel ID in pChannelID and a return
> code of
> > STATUS_NOERROR (0x00)
> >
> > -----Original Message-----
> > From: opendiag@yahoogroup <mailto:opendiag%40yahoogroups.com>
s.com
> [mailto:opendiag@yahoogroup <mailto:opendiag%40yahoogroups.com>
s.com]
> On Behalf
> > Of tbkolo
> > Sent: 11 January 2007 14:31
> > To: opendiag@yahoogroup <mailto:opendiag%40yahoogroups.com> s.com
> > Subject: [opendiag] Re: SAE J2534 Documment
> >
> >
> >
> > Hi Blue tooth1,
> >
> > Do you know what the PassThruConnect call to API should return?
Is
> > it only the error check and *pChannelID?
> >
> > I'm trying to write a dummy dll file to see what the OEM
software
> is
> > doing but it crashes after this call.
> >
> > Thanks,
> > Tom
> >
> > --- In opendiag@yahoogroup <mailto:opendiag%40yahoogroups.com>
> s.com, "blue
> > tooth1" <yetiman@> wrote:
> > >
> > > What do you need to know? Maybe I can help answer questions as
I
> > have access
> > > to a paper copy.
> > >
> > >
> > > -----Original Message-----
> > > From: opendiag@yahoogroup <mailto:opendiag%40yahoogroups.com>
> s.com
> > [mailto:opendiag@yahoogroup <mailto:opendiag%40yahoogroups.com>
> s.com]
> > On Behalf
> > > Of tbkolo
> > > Sent: 19 December 2006 11:38
> > > To: opendiag@yahoogroup <mailto:opendiag%40yahoogroups.com>
s.com
> > > Subject: [opendiag] Re: SAE J2534 Documment
> > >
> > >
> > >
> > > --- In opendiag@yahoogroup <mailto:opendiag%40yahoogroups.com>
> > s.com,
> > > "yagrool" <ailton@> wrote:
> > > >
> > > > Hello for all. I'm looking for the J2534 SAE doc. If
somebody
> > have
> > > > this, please can send to me?
> > > >
> > > > Best Regards
> > > >
> > > > Ailton
> > > >
> > >
> > > Have you been able to fins the document? I'm looking for a
copy
> as
> > > well.
> > > Thanks
> > > Tom
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
> >
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

 
Received on Fri Jan 12 19:34:21 2007