Re: [opendiag] Re: Motronic M1.8 Volvo 960 -91 information wanted.

Hi,
Where can I get Sanders KWP71 program? My old BMW still has KW71
Motronic 3.1.

Regards,
Radix

zxfriend2 schrieb:
>
> Thanks to Sander I have now established contact with the ECU through
> his KWP71Diag program. ECU ID:15h at 5bps, and then 4800bps
> ID response is OK, Fault codes are probably different on the Volvo,
> and ADC Channels returns something.
>
> Is there a software or Visual Basic code that I can use to try other
> commands? I think 02 for memory read as shown in the Fiat document
> should work. If not I will have to reprogram the ECU to return memory
> values in stead of fault codes or something.
>
> KWP71Diag
> test version
> written by SanderQV
>
> COM Port opened
> Init started
> Init Ready
> KeyBytes, count : 2
> 0B
> 02
>
> ID after 5baud init:
> ID : E00M18 , 81M00E
> ID : 92861812411 , 11421816829
> ID : 0227400035 , 5300047220
> ID : M1.8 0000 , 0000 8.1M
> New Data, ServiceID : F7
>
> Read diagnostic faultcodes :
> Bytes received: 12 72 32 13 72 32 21 78 32 32 78 32 27
> DTC: 0x12 = 18
> state : 3
> type : 0x12 unknown
> condition1 : 0x32
> condition2 : 0x13
> counter : 0x72
> DTC: 0x32 = 50
> state : 1
> type : 0x01 Open circuit
> condition1 : 0x78
> condition2 : 0x32
> counter : 0x32
> Bytes received: 68 32 2B 68 32 20 61 32
> DTC: 0x68 = 104
> state : 1
> type : 0x12 unknown
> condition1 : 0x2B
> condition2 : 0x68
> counter : 0x32
>
> New Data, ServiceID : F7
>
> Read ADC channel 0x00 :
> Value : 0x00
>
> Read ADC channel 0x01 :
> Value : 0x5E
> New Data, ServiceID : F7
>
> Read ADC channel 0x02 :
> Value : 0xE2
> New Data, ServiceID : F7
>
> Read ADC channel 0x03 :
> Value : 0xFF
> New Data, ServiceID : F7
>
> Read ADC channel 0x04 :
> Value : 0xFF
> New Data, ServiceID : F7
>
> Read ADC channel 0x05 :
> Value : 0xFF
> New Data, ServiceID : F7
>
> Read ADC channel 0x06 :
> Value : 0xBE
> New Data, ServiceID : F7
>
> Read ADC channel 0x07 :
> Value : 0x00
> New Data, ServiceID : F7
>
> Read ADC channel 0x08 :
> New Data, ServiceID : F7
>
> Read ADC channel 0x09 :
> New Data, ServiceID : F7
>
> Read ADC channel 0x0A :
> New Data, ServiceID : F7
>
>

 
Received on Sun Jan 14 10:15:53 2007